Measurement instructions

To measure as accurately as possible, it is best to use a metal measuring tape. When measuring, make sure to put it straight.

The assembly of this model is only suitable for plastic windows.

First, measure the distance between the glazing beads - from inside edge to inside edge.
a) Top view

The system width corresponds to the width of the glazing bead + 5 cm (Overhang on both sides: 2,5 cm)

A Make sure there is at least a) 0,5 cm distance from the window handle and other obstacles.

B Please note that the clamp supports are b) 20 mm wide. This width is already included in the intended overhang of 2,5 cm per side to ensure that the clamp supports do not protrude into the window surface.

To determine the order height of your Roman blind, measure the height of the window sash from its top edge to its bottom edge.

Important NOTE! The width ordered is the total width of the system. Due to production reasons, the material is 20 mm narrower per side than the system width.

A System width

B Fabric width

C - 20 mm on both sides

Enter the dimensions determined in this way into the configurator. Please make sure that the dimensions a) are entered in millimeters.